PWZD Motor Bearings Temperature Sensor

PWZD Motor Bearings Temperature Sensor Parameters

For the sensor body shell protection ability IP54
Sensor for continuous duty（S1）
Name：PWZD
Current motor bearing temperature sensor：4-20mA
Voltage ：18-24VMeasurement range ：0-200℃

Motor Bearings Temperature Sensor Insrall & Use

1、 Used to measure temperature of motor bearing, the first sensor junction box installed in proper position of the motor, tighten the screw connection, connected to ground.
 2、Insert the temperature sensor element (probe) motor bearing in a nearby screw hole (such as motor casing, drilling shaft shell), nut and screw down the installation.
 3、Open the sensor junction box, will lead to cable connected and cover the lid, will lead to cable received a designated place connected with the Ann model secondary instrument.
 4、When installation, 300 mm with Mr. Head fixed intervals, lead convenient bourdon tube bending radius should not less than 60 mm, lead long can roll ring to hang in the right place, and away from heating equipment.
 5、If choose "do not move" nut installation, must first install the probe part when installed, then install junction box.

Motor Bearings Temperature Sensor Working Environment

Altitude less than 2000m；
Ambient air temperature-20℃～＋40℃；
In the wet, the monthly average high relative humidity 90%（25℃ h）；
The place of no violent vibration and impact；
Without enough insulation around or metal corrosive gas and steam environment.